Windows 2000 Workstation Configuration

Configuring the TCP/IP Network Protocol with DHCP

This document assumes the the TCP/IP protocol is installed.

DHCP is the recommended setting for your Igaware Server Appliance. You can select it by accessing the Igaware Administration Interface, Administration/Servers/DHCP. Ensure DHCP is enabled.

If you are not using your Igaware Server Appliance as a DHCP server click here. DHCP is the recommended setting for your Igaware Server Appliance. You can select it by accessing the Igaware Administration Interface - Administration/Servers/DHCP, ensure DHCP is enabled.

1. From the Start menu, select Settings, choose Network and Dial-Up Connections.
   
   
2. Right-click on Local Area Connection and select Properties.
   
   
3. Select TCP/IP and click Properties.
   
   
4. Select Obtain an IP address automatically and Obtain an IP address automatically
   
   
   
   
5. Click OK to close the TCP/IP Properties window.
   
   
6. Click OK to close the Local Area Connection window.
   
   
7. Restart your computer.